dryer fabric belt/dryer fabric mesh belt/forming belt filter fabric

Description
Multilayer belt dryer is specially designed for drying different shapes of root vegetables and leafy vegetables. This drying machine has three-layer and five-layer structure, each layer can be independently adjusted the drying temperature according to the characteristics of the materials.
The working principle of this multilayer conveyor dryer shows as follows: the material is limit controlled by the hopper and is evenly spread on the mesh belt. The materials are driven by the motor to the top layer, then perform uniform motion in the multilayer belt dryer and conduct downward movement layer by layer. Cold air enters from the two axial flow fans, after ballasting via baffle plate, it will flows from bottom to top. There is equipped with a heater under the mesh belt at each layer. The cold air is constantly gradient heated, and then through the material layer. It will conduct mass transfer and heat transfer with the material layer, so that the moisture contained in the material can be rapidly vaporized and evaporated. When the cold air gets to the top layer, it has become saturated moist air, and will be discharged outdoors under the action of exhaust fan.

The advantages :

 1. The mesh belt has good gas permeability, and the product drying cycle can be adjusted arbitrarily.
2. The equipment runs smoothly and the materials are not easily damaged.
3. Large drying area and high strength.
4. Hot air circulation structure, uniform temperature and reduced energy consumption.
5. According to customer needs, it can be divided into several units, each unit can control the loop separately.
6. There are various heat source selections, such as electric heating, heat transfer oil heating, hot air heating, etc.